View HA13166H_1062695.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HA13166H
Multiple Voltage Regulator for Car Audio
REJ03F0224-0100 Rev.1.00 Jan 16, 2007
Description
The HA13166H is a compact multiple voltage regulator for car audio system. The outputs of this IC output consist of regulated 5.7 V output for a microcontroller, regulated 3.3 V output for a digital signal processor, regulated 8 V output for CD driver, regulated 9.0 V output for audio control, regulated 10 V output for illuminations and regulated 5 V output, VCC-dependent output for external output and VCC-dependent output for remote-ANT.
Functions
General * ACC power monitor circuit is built-in. * Low saturation output (PNP output) used for audio output. * Adjustable voltage for illumination output by changing an external resistor. Protections * Output current limit circuit to avoid device destruction caused by shorted output, etc. * High surge input protector against VCC and ACC. * Built in a thermal shutdown circuit to prevent against the thermal destruction.
Rev.1.00 Jan 16, 2007 page 1 of 18
HA13166H
Pin Description and Equivalent Circuit
Function Pin No. 1 Pin Name EXT OUT Specification VCC-1 V/300 mA min Equivalent Circuit
Vcc Vcc
Normal Operation Output voltage is VCC-1 V when M or H level applied to CTRL pin. Output voltage is VCC-1 V when M or H level to CTRL pin and H level to ANT-CTRL.
TSD 0V
Surge Input 0V
2
ANT OUT
VCC-1 V/300 mA min
90 k 10 k
0V
0V
3
ACC IN
--
45 k 15 k
Connected to VCC.
--
--
4
VDD OUT
5.7 V/100 mA min
Vcc Vcc
Regular 5.7 V.
5.7 V
0V
215 k 63 k
5
SW5V OUT
5.0 V/100 mA min
VDD Vcc
Output voltage is 5 V when M or H level applied to CTRL pin. Output for ACC detector
0V
0V
6
COMP OUT
5.0 V/100 mA min
50 k
0V
0V
7
ANT CTRL
--
51 k 49 k
L: ANT output OFF H: ANT output ON
--
--
8
VCC
--
Connected to VCC
--
--
Rev.1.00 Jan 16, 2007 page 2 of 18
HA13166H
Pin Description and Equivalent Circuit (cont.)
Function Pin No. 9 Pin Name DSP OUT Specification 3.3V/150 mA min Equivalent Circuit
Vcc Vcc
Normal Operation Regular 3.3 V.
TSD 3.3 V
Surge Input 0V
100 k 63 k
10
AUDIO OUT
9.0 V/500 mA min
Vcc Vcc
Output voltage is 9 V when M or H level applied to CTRL pin.
0V
0V
77.3 k 12.3 k
11
CTRL
--
65 k 35 k
L: BIAS OFF M: BIAS ON H: CD ON
--
--
12
CD OUT
8.0 V/1.3 A min
Vcc Vcc
Output voltage is 8 V when H level applied to CTRL pin.
0V
0V
64.7 k 12.4 k
13 14
ILM AJ ILM OUT
-- 10.0 V/500 mA min
Vcc Vcc
Adjustment pin for ILM output voltage. Output voltage is 10 V when M or H level applied to CTRL pin
-- 0V
-- 0V
33.4 k 5 k
15
GND
--
Connected to GND
--
--
Rev.1.00 Jan 16, 2007 page 3 of 18
HA13166H
Timing Chart
21 V VCC Surge pulse
VDD OUT DSP OUT
CTRL
ANT CTRL AUDIO OUT CD OUT ILM OUT EXT OUT SW5V OUT ANT OUT ACC IN COMP OUT 2.8 V
2.5 V
Rev.1.00 Jan 16, 2007 page 4 of 18
HA13166H
Block Diagram
+B ACC
VCC - + 1
8
3
ACC IN
EXT OUT
Surge protector + - Vth COMP OUT
ANT OUT
- + 2 TSD BIAS
6
ANT CTRL
7 Vth
+ -
VREF VREF + - + -
5
SW5V OUT
4
VDD OUT
CTRL
11 VthH
+ -
VthM
VREF CD OUT + - 12 VREF
+ - 9
DSP OUT
AUDIO OUT +
- + 10
VREF
+ - 14
ILM OUT
15 GND GND
TAB
13 ILM AJ
Rev.1.00 Jan 16, 2007 page 5 of 18
HA13166H
Absolute Maximum Ratings
(Ta = 25C)
Item Operating power supply voltage DC supply voltage Peak voltage Power dissipation Junction temperature Operating temperature Storage temperature Symbol Vcc Vcc(DC) Vcc(PEAK) Pd Tj Topr Tstg Rating 18 26 50 36 150 -40 to +85 -55 to +125 Unit V V V W C C C Note 1 2 3
Notes: Recommended power supply voltage range 10 to 16 V. 1. Applied time is less than 30 s. 2. Surge pulse as input. 3. Ta = 25C. : Permissible power dissipation when using a heat sink of infinite area. Refer to the derating curves below.
20
Power dissipation Pd (W)
15 thin = 1.6 mm, 100 cm Aluminum heat sink 11.0 W 10 8.7 W thin = 1.6 mm, 50 cm Aluminum heat sink
5
1.8 W 0 0 25
w/o heat sink 50 75 100 125 150 175
Ambient temperature Ta (C)
Rev.1.00 Jan 16, 2007 page 6 of 18
HA13166H
Electrical Characteristics
(unless otherwise noted, Vcc = 13.2 V, Ta = 25C)
Item Standby current CTRL L level (STBY mode) CTRL M level (CD OFF mode) CTRL H level (CD ON mode) ANT CTRL L level (ANT OFF mode) ANT CTRL H level (ANT ON mode) VDD OUT Output voltage Voltage regulation Load regulation Minimum I/O voltage differential Output current capacity Ripple rejection ratio CD OUT Output voltage Voltage regulation Load regulation Minimum I/O voltage differential Output current capacity Ripple rejection ratio AUDIO OUT Output voltage Voltage regulation Load regulation Minimum I/O voltage differential Output current capacity Ripple rejection ratio ILM OUT Output voltage Voltage regulation Load regulation Minimum I/O voltage differential Output current capacity Ripple rejection ratio DSP OUT Output voltage Voltage regulation Load regulation Output current capacity EXT OUT ANT OUT Ripple rejection ratio Differential I/O voltage Load regulation Output current capacity Differential I/O voltage Load regulation Output current capacity Symbol IST VCL VCM VCH VACL VACH Vo1 Vo11 Vo12 Vo13 Io1 SVR1 Vo2 Vo21 Vo22 Vo23 Io2 SVR2 Vo3 Vo31 Vo32 Vo33 Io3 SVR3 Vo4 Vo41 Vo42 Vo43 Io4 SVR4 Vo5 Vo51 Vo52 Io5 SVR5 Vo61 Vo62 Io6 Vo71 Vo72 Io7 Min -- 0 2.0 4.0 0 3.0 5.4 -- -- -- 100 50 7.6 -- -- -- 1.3 45 8.5 -- -- -- 500 40 9.5 -- -- -- 500 32 3.1 -- -- 150 50 -- -- 300 -- -- 300 Typ 400 -- -- -- -- -- 5.7 10 50 1.0 250 60 8.0 40 70 1.0 2.0 50 9.0 30 100 0.4 850 50 10.0 40 50 1.0 900 40 3.3 10 50 300 60 1.0 350 500 1.0 350 500 Max 600 1.0 3.0 - 2.0 - 6.0 50 100 1.5 -- -- 8.4 100 150 1.5 -- -- 9.5 90 200 0.9 -- -- 10.5 100 100 1.5 -- -- 3.5 50 100 -- -- 1.5 600 -- 1.5 600 -- Unit A V V V V V V mV mV V mA dB V mV mV V A dB V mV mV V mA dB V mV mV V mA dB V mV mV mA dB V mV mA V mV mA Io1 = 80 mA Vcc = 10 to 16 V, Io1 = 80 mA Io1 = 0 to 80 mA Io1 = 80 mA Vo1 5.4 V f = 100 Hz, Io1 = 80 mA Io2 = 1.0 A Vcc = 10 to 16V, Io2 = 1.0 A Io2 = 10m to 1.0 A Io2 = 1.0 A Vo2 7.6 V f = 100 Hz, Io2 = 1.0 A Io3 = 400 mA Vcc = 10 to 16 V, Io3 = 400 mA Io3 = 10 to 400 mA Io3 = 400 mA Vo3 8.5 V f = 100 Hz, Io3 = 400 mA Io4 = 400 mA Vcc = 12.5 to 16 V, Io4 = 400 mA Io4 = 10 to 400 mA Io4 = 400 mA Vo4 9.5 V f = 100 Hz, Io4 = 400 mA Io5 = 120 mA Vcc = 10 to 16 V, Io5 = 120 mA Io5 = 0 to 120 mA Vo5 3.1 V f = 100 Hz, Io5 = 120 mA Io6 = 300 mA Io6 = 10 to 300 mA Vo6 11.7 V Io7 = 300 mA Io7 = 10 to 300 mA Vo7 11.7 V Test Condition ACC = 0 V, CTRL = 0 V
Rev.1.00 Jan 16, 2007 page 7 of 18
HA13166H
Electrical Characteristics (cont.)
(unless otherwise noted, Vcc = 13.2 V, Ta = 25C)
SW5V OUT ACC OUT Item Output voltage Output current capacity Output voltage Output current capacity Rise threshold voltage Hysteresis range Symbol Vo8 Io8 Vo9 Io9 VTHH9 VTH9 Min 4.6 100 4.6 100 2.6 0.2 Typ 5.0 300 5.0 300 2.8 0.3 Max 5.4 -- 5.4 -- 3.0 0.4 Unit V mA V mA V V Test Condition Io8 = 80 mA, VDD = no load Vo8 4.6 V Io9 = 40 mA, VDD = no load Vo9 4.6 V
Evaluation Circuit
HA13166H
EXT OUT 1 ANT OUT 2 ACC IN 3 VDD OUT 4 SW5V COMP ANT OUT OUT CTRL 5 6 7 DSP AUDIO OUT OUT CTRL 9 10 11 CD OUT 12 ILM AJ 13 ILM OUT 14
VCC 8
GND 15
C1 0.1 F
C2 0.1 F
C3 0.1 F
C11 0.1 F
C8 +
C9 10 F 0.1 F
C10 0.1 F
EXT
ANT
VDD
SW5V
COMP
DSP
AUDIO
CD
ILM
SW1 SW4 SW2 SW3 R2 3.3 k R3 3.3 k
C6 100 F
+
C7 0.1 F
ACC
ANT CTRL VCC
CTRL
5V
Rev.1.00 Jan 16, 2007 page 8 of 18
HA13166H
Main Characteristics
CTRL, ANTCTRL Vth vs. Tc 5 CTRL(M) CTRL(H) ANTCTRL 4 Vcc = 13.2 V
3
Vth (V)
3.0 V CTRL(M/H) 4.0 V
2.0 V ANTCTRL(L/H) 3.0 V 2
1.0 V CTRL(L/M) 2.0 V 1
0 -50
-25
0
25
50 Tc (C)
75
100
125
150
ACC.DET Vth vs. Tc 3.2 ACC ACC 3.0 2.6 V ACC.DET 3.0 V 2.8 Vcc = 13.2 V
Vth (V)
2.6
2.4
0.2 V ACC.DET 0.4 V
2.2
2.0 -50
-25
0
25
50 Tc (C)
75
100
125
150
Rev.1.00 Jan 16, 2007 page 9 of 18
HA13166H
Vo-Io Characteristics VDD Output 6 Vcc = 13.2 V 5
4
Vo (V)
5.4 V Vo 6.0 V Io 100 mA
3
2
1 100C 25C -40C 0 0 100 200 Io (mA) Vo-Io Characteristics CD Output 9 Vcc = 13.2 V 8 7 6 5 4 3 2 1 0 100C 25C -40C 0 0.5 1.0 1.5 Io (A) 2.0 2.5 3.0 7.6 V Vo 8.4 V Io 1.3 A 300 400 500
Rev.1.00 Jan 16, 2007 page 10 of 18
Vo (V)
HA13166H
Vo-Io Characteristics Audio Output 10 Vcc = 13.2 V 9 8 7 6
Vo (V)
8.5 V Vo 9.5 V Io 500 mA
5 4 3 2 1 0 100C 25C -40C 0 200 400 600 800 1000 Io (mA) 1200 1400 1600
Vo-Io Characteristics ILM Output 12 Vcc = 13.2 V
10
8
Vo (V)
6
9.5 V Vo 10.5 V Io 500 mA
4
2 100C 25C -40C 0 0 200 400 600 800 1000 Io (mA) 1200 1400 1600
Rev.1.00 Jan 16, 2007 page 11 of 18
HA13166H
Vo-Io Characteristics DSP Output 3.5 Vcc = 13.2 V 3.0 3.0 V Vo 3.6 V Io 150 mA
2.5
Vo (V)
2.0
1.5
1.0
0.5
100C 25C -40C 0 100 200 300 Io (mA) 400 500 600
0
Rev.1.00 Jan 16, 2007 page 12 of 18
HA13166H
Vo-Io Characteristics EXT Output 14 Vcc = 13.2 V 12
10 11.7 V Vo 13.2 V Io 300 mA
Vo (V)
8
6
4
2
100C 25C -40C 0 200 400 Io (mA) Vo-Io Characteristics ANT Output 600 800 1000
0
14 Vcc = 13.2 V 12
10 11.7 V Vo 13.2 V Io 300 mA
Vo (V)
8
6
4
2
100C 25C -40C 0 200 400 Io (mA) 600 800 1000
0
Rev.1.00 Jan 16, 2007 page 13 of 18
HA13166H
Vo-Io Characteristics COMP Output 6 Vcc = 13.2 V 5
4
Vo (V)
4.6 V Vo 5.4 V Io 100 mA 3
2
1 100C 25C -40C 0 0 100 200 Io (mA) Vo-Io Characteristics SW5V Output 6 Vcc = 13.2 V 5 300 400 500
4
Vo (V)
4.6 V Vo 5.4 V Io 100 mA 3
2
1 100C 25C -40C 0 0 100 200 Io (mA) 300 400 500
Rev.1.00 Jan 16, 2007 page 14 of 18
HA13166H
SVR vs. Tc VDD Output 70 Vcc = 13.2 V Ripple = 100 Hz
65
SVR (dB)
60
55
50
VDDSVR 50 dB 0 20 40 60 Io (mA) 80
Tc = 100C Tc = 25C Tc = -30C 100 120
SVR vs. Tc CD Output 70 Vcc = 13.2 V Ripple = 100 Hz 65
60
SVR (dB)
55
50
45
40 CDSVR 45 dB 0 200 400 600 Io (mA) 800
Tc = 100C Tc = 25C Tc = -30C 1000 1200
35
Rev.1.00 Jan 16, 2007 page 15 of 18
HA13166H
SVR vs. Tc ILM Output 70 Vcc = 13.2 V Ripple = 100 Hz 65
60
55
SVR (dB)
50
45
40
35 ILMSVR 32 dB 0 100 200 Io (mA) SVR vs. Tc Audio Output 70 300
Tc = 100C Tc = 25C Tc = -30C 400 500
30
Vcc = 13.2 V Ripple = 100 Hz 65
60
SVR (dB)
55
50
45 Tc = 100C Tc = 25C Tc = -30C 400 500
40
AUDIOSVR 40 dB 0 100 200 Io (mA) 300
Rev.1.00 Jan 16, 2007 page 16 of 18
HA13166H
SVR vs. Tc DSP Output 75 Vcc = 13.2 V Ripple = 100 Hz 70
SVR (dB)
65
60
55 Tc = 100C Tc = 25C Tc = -30C 80 100 120
50
DSPSVR 50 dB 0 20 40 60 Io (mA)
Rev.1.00 Jan 16, 2007 page 17 of 18
HA13166H
Package Dimensions
JEITA Package Code P-HSIP15-14.3x19.66-1.27 RENESAS Code PRSS0015DA-C Previous Code SP-15TGV MASS[Typ.] 3.0g Unit : mm
20.5 MAX 19.66 19.0
0.3
3.3MiN 3.6
0.2
3.5 TYP 3.8MAX
2-C3.0
0.2
1.1MiN 1.28 TYP 1.50MAX
11.3 0.3
3.0
0.2
7.8
13.8
0.25
*1
+0.10 -0.05
1.110.25
0.6
0.1
1.27
0.25
*1
2.54
0.25
1.8 0.25 3.5
0.5
*1
6.04
0.5 *1
Note) 1. Dimension "*1" is the value after bending.
( Ni/Pd/Au plating )
Rev.1.00 Jan 16, 2007 page 18 of 18
17.9
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries.
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
http://www.renesas.com
Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510
(c) 2007. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.0

▲Up To Search▲

Price & Availability of HA13166H

	To Download HA13166H Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .